The all steel ceramic anti-static floor is made of high-quality alloy cold-rolled steel plate, with a stee plate shell structure and high-strength cement filling. lt is formed by spot welding after stretching During the production process of ceramic surface layer, anti-static additives are uniformly injected Due to the wear resistance of the surface layer, the anti-static performance can be maintained foi more than 60 years. Moreover, the system resistance is stable and has been tested by the Anti Stati Association of the Ministry of lnformation Industry, and all performance requirements have been met.
The product is made of high-quality alloy cold-rolled steel plate, which is formed by spot welding Iafter stretching. After phosphating, the outer surface is subjected to electrostatic spraying treatment, and the inner cavity is filled with standard pure cement. The upper surface is pasted with high wear-resistant and fire-resistant high-pressure layer board (HPL) or PVC board, with straight or folded edges around. All steel anti-static flooring is made by pouring cement into a spot welded metal shell, which has a high conductivity and outstanding anti-static performance.
Aluminum alloy anti-static floor (including aluminum alloy ventilation board) is completely made of aluminum alloy by one-time negative pressure casting,integrating the corrosion resistance and high strength characteristics of aluminum alloy. It has the characteristics of high dimensional accuracy, good conductivity, good fire resistance, anti magnetism, and not easy to deform. Extremely stable in performance, it is the highest grade product in anti-static flooring.
The anti-static floor board is made of high-quality particle board, surrounded by aluminum alloy or anti-static rubber edge sealing, with a surface layer of anti-skid and wear-resistant melamine anti-static veneer, and a bottom surface of aluminum foil or steel plate.
The structure of the ventilation board is similar to that of the anti-static all steel loverhead raised floor, but without foaming filler. The ventilation system is composed of circular ventilation holes. Ventilation raised floor is used in conjunction with all steel raised raised raised floor, for places with ventilation requirements below the floor, with a floor ventilation rate of 17% -36%.
Lipin Glass Flooring adopts emulsified steel technology for one-time tempering, which can bear a weight of about 1 ton. Its performance strength is far greater than that of ordinary tempered glass. It uses high-strength aluminum magnesium alloy frames and has been certified by the National Anti static Product Quality Supervision and Inspection Center for authoritative testing. The load per unit area of a single piece is more than 10000N (i.e. 1000kg).
The all steel ceramic anti-static floor is made of high-quality alloy cold-rolled steel plate, with a stee plate shell structure and high-strength cement filling. lt is formed by spot welding after stretching During the production process of ceramic surface layer, anti-static additives are uniformly injected Due to the wear resistance of the surface layer, the anti-static performance can be maintained foi more than 60 years. Moreover, the system resistance is stable and has been tested by the Anti Stati Association of the Ministry of lnformation Industry, and all performance requirements have been met.
The all steel ceramic anti-static floor is made of high-quality alloy cold-rolled steel plate, with a stee plate shell structure and high-strength cement filling. lt is formed by spot welding after stretching During the production process of ceramic surface layer, anti-static additives are uniformly injected Due to the wear resistance of the surface layer, the anti-static performance can be maintained foi more than 60 years. Moreover, the system resistance is stable and has been tested by the Anti Stati Association of the Ministry of lnformation Industry, and all performance requirements have been met.
High density calcium sulfate flooring is made by processing and solidifying raw materials intc calcium sulfate crystals, and using non-toxic and unbleached plant fibers as reinforcemen materials through a pulse pressing process. The covering adopts HPL melamine anti-static veneer, PVC, ceramic tiles, carpets, marbie or natural rubber, etc. The plastic edging around the floor is generally used, and the bottom of the floor is generally made of galvanized steel plate.
