All steel anti-static flooring is widely used in places with high requirements for electrostatic protection, such as computer rooms, communication rooms, data centers, laboratories, etc. It can effectively prevent the generation and accumulation of static electricity, providing a guarantee for the safe operation of electronic devices. The specifications of all steel anti-static flooring mainly include the following: 600 × 600 × 30mm: This is a commonly used specification.

Use a level to check the flatness of the installed raised floor. The flatness error of the entire floor surface should comply with relevant standards. Generally, the height difference between adjacent panels should not exceed 0.5mm, and the height difference between any two panels should not exceed 2mm. If it is found that the flatness does not meet the requirements, it may

Computer room raised floor is a floor system specifically used in computer rooms, data centers, and other places. The following precautions should be taken during the use of the elevated floor in the computer room:1、 Personnel operation aspect Restricting the range of personnel movement In the computer room, the walking route of the staff should be clearly defined, and efforts should be made to avoid walking around freely in the elevated floor area. Frequent walking may cause uneven pressure on the floor, leading to deformation or damage.

Network flooring has various environmental performance, mainly reflected in the following aspects: environmentally friendly materials: no harmful substance release: Network flooring usually uses high-quality steel, calcium sulfate board base, cement and other basic materials, as well as environmentally friendly veneer materials and adhesives. These materials themselves do not contain harmful substances such as formaldehyde, benzene and other volatile organic compounds, and will not pollute indoor air during use, ensuring the health of users

Preventing static electricity damage: In places such as electronic computer rooms, program-controlled telephone exchange rooms, and electronic instrument factory assembly workshops, integrated circuits, chips, and other components in electronic equipment are extremely sensitive to static electricity. Anti static elevated floor can quickly dissipate the static electricity generated by human body and equipment operation to the ground, avoiding the discharge phenomenon caused by static electricity accumulation, thereby preventing interference, breakdown and other damage to electronic equipment caused by static electricity, and ensuring the normal operation and service life of equipment

Anti static floor in computer rooms is a type of floor used to prevent static electricity from occurring in computer rooms. The anti-static floor in the computer room has the following characteristics and advantages: good anti-static performance: its surface resistance or volume resistance is within the specified range, generally between to ohms, which can effectively dissipate static electricity to the ground, prevent static electricity from damaging electronic equipment in the computer room, and avoid data loss, equipment failure and other problems caused by static electricity